|
 |
|
|
|
Contact Us
|
Home - Contact Us - News News
stone profiling machine Several faults in the cutting machineTime：2018-03-13 Hits：3477
Several faults in the cutting machine
Failure status:1. Turn on the power switch, the power switch indicator is not on, the fan does not turn, and there is no welding current output. 2. The power switch is turned on, the power indicator is on, the fan is turned down for a few times, or it will stop automatically after one welding.
5. Turn on the indicator light, turn the fan and press the solder switch completely. 6. Turn on the indicator light, turn the fan, press the welding gun switch to have high frequency and no gas (or keep out of gas), the air valve does not move. 7. The starting indicator light is on, the abnormal indicator light is not bright, the fan is turned, and there is no high frequency, but can contact the arc (there is no load). 8. The boot indicator light is on, the abnormal indicator light is not bright, the fan turns, and according to the welding gun switch, there is no high frequency and no arc (no load). 9. Turn on the indicator light, turn the fan, press the torch switch, and press the gun switch. (or manual welding with abnormal lights on) 10. Turn on the indicator light, turn the fan, press the torch switch, the abnormal light is not bright, but a welding abnormal light is on. 12. According to the welding gun switch, there are high frequency sound energy to discharge the workpiece, but no current output cannot start the arc. High frequency but not good arc. Hesheng machinery was established in 1980,produce Automatical Bridge Saw.High Efficiency Multidisc Block Cutter.Gantry Block Cutter. Manual Edge Cutting Machine. Special Shape Processing Machine for Countertop.Column...Collection of Polishing Machine and other cutstomize equipment for processing slab and block material. |
|
Copyright ? 2017 m.028xiaofang.com All Rights Reserved Design:Chinatuiba |
