|
 |
|
|
|
Contact Us
|
Home - Contact Us - News News
stone calibrating machine How to clean stone polishing machineTime：2018-05-08 Hits：3728During the use of stone machinery and equipment, impurities generated in the cutting process often lead to a layer of stains on the surface of the equipment, thus affecting the use of stone machinery and equipment. Stone sawing machine is a kind of stone equipment with high efficiency. because of the high cutting strength in use, splashing stone residue often adheres to the surface of stone sawing machine. Over time, the accumulation of stains will largely affect the cutting process of stone sawing machine. So, after a long time of use, how should the stone sawing machine be cleaned?
In the process of mechanical cleaning, non-metallic hammer rods can be used to knock the oil pipe, which can be used to knock continuously or discontinuously, so as to facilitate the removal of attachments in the pipeline. When cleaning general hydraulic stone sawing machine, hydraulic oil or test oil used for work shall be mostly used. Kerosene, gasoline, alcohol, steam or other liquids cannot be used to prevent hydraulic components, pipelines, oil tanks and seals from being corroded. the cleaning time is generally ( 48 - 60 ) hours, which should be determined by factors such as the complexity of the system, filtration accuracy requirements and pollution degree. In order to prevent corrosion caused by external moisture, the hydraulic pump should run continuously at the end of cleaning until the temperature returns to normal. After cleaning, clean the cleaning oil in the loop. Hesheng machinery was established in 1980,produce Automatical Bridge Saw.High Efficiency Multidisc Block Cutter.Gantry Block Cutter. Manual Edge Cutting Machine. Special Shape Processing Machine for Countertop.Column...Collection of Polishing Machine and other cutstomize equipment for processing slab and block material.
|
|
Copyright ? 2017 m.028xiaofang.com All Rights Reserved Design:Chinatuiba |
