偷拍自亚洲色制服图区,97亚洲超碰一区二区,国产亚洲综合张飞跃在线,正在播放东东热久久综合88,任你躁国语AV在线观,欧美大胆老熟妇乱子伦视频,2018精品国产不卡a,free欧美丰满熟妇

tone profiling machine,stone machine Analysis of common faults of automatic bridge cutter

Time：2018-06-04 Hits：3640

Analysis of common faults of automatic bridge cutter

        1. Common faults in hydraulic system

        The hydraulic system of this equipment is mainly used to control the lifting and turning of the sliding frame, the rotation of the workbench and the lifting and turning of the workbench. Common faults include: low system pressure or no pressure; Each hydraulic cylinder has insufficient force; The oil cylinder cannot maintain pressure; The oil cylinder speed drops, the oil pump load is heavy, the noise is big; Unable to complete one or more hydraulic control actions.

        2. The causes of mechanical failure mainly include

        the parallelism of left and right guide beam is too poor; The left and right guide beams are not in the same horizontal plane; The straightness of one side or two guide beams is too poor; The meshing gap between two running gears is not consistent or seriously worn. The guide rail of rolling line is damaged; Deformation of guide beam caused by foundation settlement; The plate is not stably placed on the working table, and there is displacement in the form.

        In order to solve the inaccuracy of the plate width superheterodyne segment caused by mechanical failure, the first measurement should be made: the measurement value of the horizontal error of guide beam should be less than or less than 0.06/1000. The meshing gap between the walking gear and the rack of guide rail beam should be between 0.05 and 0.10mm. The parallel degree of guide rail on both sides is 0.50mm. If there is any deviation, it should be adjusted and repaired.

        Hesheng machinery was established in 1980,produce Automatical Bridge Saw.High Efficiency Multidisc Block Cutter.Gantry Block Cutter. Manual Edge Cutting Machine. Special Shape Processing Machine for Countertop.Column...Collection of Polishing Machine and other cutstomize equipment for processing slab and block material.