|
 |
|
|
|
Contact Us
|
Home - Contact Us - News News
How to choose a good quality stone machinery?Time：2018-09-29 Hits：5746China's technology continues to develop, and the major industries are developing so rapidly. Of course, the stone industry is not far behind. The major stone enterprises have begun to provide their own high-quality, high-energy-saving and high-efficiency stone machinery in order to save labor costs. For stone machinery, how to choose the best quality products?Good quality Fujian stone machinery has the following conditions: 1, the choice of body materials A. The outer part of the outer casing is made of aluminum alloy or stainless steel, which is mainly resistant to corrosion and rust; the iron type is easy to corrode and rust, and may cause secondary pollution of the stone to produce rust spots; B, the comparison of the power cord, choose not easy to break the line (the rupture will cause electric shock!), such as good quality PU leather or rubber leather can be cold to minus 40 degrees Celsius, no cracking; also a low-cost PVC The leather line, under severe cold weather conditions, can cause breakage and can not be straightened and twisted into a mass that is difficult to straighten. 
When the operator operates the device, the product with good stability does not jump, the resistance is small, the operation is easy, and the work fatigue is reduced. 3, motor performance What is a good motor? There is no difference in the size of the motor of Fujian Stone Machinery, which often makes most people think that the appearance of the motor is a good motor. This is a misunderstanding. The motor is mainly composed of copper wire and silicon steel sheet, of course, there are other accessories; good materials can not make good products without good craftsmanship. Judging 1 method: 1. Noise (no abnormal noise, no noise), and the noise is smooth; 2, the vibration is small; 3, the temperature rise (degree) is low, ≤ 50 degrees Celsius; 4, the torque is large. Judgment 2 method: use professional equipment to detect. Then a small motor can meet these conditions, so it is a good motor! 4, the performance of the gearbox Noise (no noise, no noise), smooth noise; but small noise is not necessarily good, but loud noise is not a good product. At this point, you must choose a manufacturer that is technically trustworthy. 5, the overall performance and efficiency of the product There are two combinations of motor and gearbox: 1. The motor shaft and the gear box are directly hard-connected. The advantage is that there is no broken connection actuator; the disadvantage is that once the damage is caused, the maintenance cost is too high or the maintenance cannot be repaired. 2. The motor and gear box are installed separately, mainly by connector transmission. The advantage is easy replacement and low maintenance cost. The disadvantage is that some products use unreasonable drive connectors to cause non-durability. 6, after sales service The manufacturer's repair service response is fast enough! Is the supply of parts timely? Is the warranty year of the product reached? These are all factors to consider. |
|
Copyright ? 2017 m.028xiaofang.com All Rights Reserved Design:Chinatuiba |
